Bubble clouds form, grow and collapse periodically; collapse emits strong shock waves and impulse signals measurable via vibration/pressure traces, indicating shock-wave formation aligns with erosion zones on impacted walls .
Peak shock pressures are extremely high (order > 1 GPa) and microjets can reach several 100 m/s, explaining localized high-impact erosion and material removal mechanisms .
Cavitation cloud evolution (experiment vs. simulation)
Cavitation clouds show irregular/asymmetric shapes, a shedding (re-entrant) process, and correlate with jet-core and vortex dynamics; cloud front speed ~0.15–0.3 uj in studies presented .
Cloud shedding, downstream collapse zones and associated vortex rings determine where erosion/peening occurs on the target .
Types of cavitating-jet generation — summary table
Main families: central-body (bypass-type), oscillatory/self-excited (Helmholtz, organ-pipe, dual-chamber) and shear (submerged jets/annular) with different strengths, stability and application scopes .
Design trade-offs: flat-head → peak intensity but low stability; conical → higher sustained velocity and better stability for extended-range applications .
Central-body nozzles — geometry & bubble distribution
Central-body induces wake vortices and core cavitation; relative diameter and outlet profile strongly affect bubble axial/radial distribution and effective impingement distance .
Larger central-body: bubble concentration in jet core; smaller relative diameter: bubbles at jet interface — impacts erosion pattern and target distance choices .
Self-excited nozzles exploit resonance between jet structural frequency, cavity natural frequency and disturbance waves; produce pulsed jets with peak forces 1.6–1.7× continuous jets and enable controlled periodic cloud shedding .
Key control knobs: suction/discharge diameters, cavity length/volume, inlet pressure — pulse frequency and amplitude trade off depending on chamber geometry and inlet pressure .
Factors controlling self-excited jet strength & frequency
Most influential geometrical parameters: suction nozzle diameter and discharge nozzle diameter; cavity diameter/length and collision angle also affect low-pressure regions and pulse amplitude .
Working fluid properties: higher viscosity delays inception (requires larger pressure drop), lower surface tension promotes bubble splitting (reduces peak pulse energy) — must tune fluid/additives per application .
Erosion patterns and standoff optimization
Self-excited jets exhibit distinct erosion patterns (Pattern A, B, C) varying with cavitation number σ and standoff s/d; optimal standoff distances produce peaks in mass loss/erosion area — critical for peening vs material removal tasks .
High confining pressure reduces effective impinging distance and can eliminate secondary erosion peaks — design must account for ambient pressure .
Shear (submerged) cavitation and annular/nozzle enhancements
Shear cavitation forms annular cavitation in the shear layer; three zones: growth, shedding and collapse — vortex structures drive cloud detachment and collapse downstream .
Annular or coaxial arrangements (creating local submersion) extend cavitation persistence in air and non-submerged conditions, improving erosion/cleaning capability near the nozzle exit .
Representative quantitative results: pulse amplitude, fatigue improvement and pressure vs distance
Cavitation peening improved fatigue strength vs untreated and other peening methods (reported increases in fatigue resistance and residual compressive stress) — cavitation peening often outperforms water-jet or laser peening in fatigue-life tests .
Organ-pipe nozzle experiments show axial pressure fluctuation amplitude peaks at specific standoff distances and is sensitive to ambient pressure — informs optimum standoff selection for highest impact .
Applications: surface enhancement, polishing, micro-forming, cutting, energy & cleaning
Surface strengthening (cavitation shot peening / MFC) — significant increases in hardness, residual compressive stress and fatigue life reported; combining ultrasound & hydrodynamic cavitation yields better surface properties and corrosion resistance .
Polishing & micro-forming — cavitation-assisted polishing and cavitation micro-bulging achieve nm-scale roughness improvements and feasible microforming (e.g., >240 μm deformation in thin foils) .
Cutting & rock breaking — ultrasonic/laser cavitation and pulsed cavitation jets applied to micro-drilling, blanking and rock/hydrate erosion; nozzle geometry optimization increases rock/hydrate removal and slotting performance .
Energy exploration — cavitating jets assist coalbed methane desorption, hydrate erosion and rapid solution mining (self-excited jets show 1–2× cutting/erosion vs conventional jets) .
Cleaning & biofilm removal — cavitating jets (including laser-induced wet cleaning) effectively dislodge nanoparticles and biofilms; cavitation jet cleaning shows superior removal vs standard jets in many trials .
Wastewater / biological treatment — hydrodynamic cavitation produces radicals and shear for pollutant degradation, sludge solubilization and enhanced biodegradability (improved COD reduction, enhanced biogas yields) .
Design & research recommendations
Priorities: optimize nozzle geometries to maintain cavitation at lower energy; pursue hybrid systems (ultrasonic/laser + hydrodynamic) for precision tasks; improve CFD and coupled multiphase models validated by experiments to predict operational performance and scale-up effects .
思维导图
深度阅读
报告元数据与概览(引言与报告概览)
报告标题:The Generation Methods and Applications of Cavitating Jet by Using Bubble Collapse Energy(气蚀喷流的产生方法与基于气泡坍塌能量的应用综述)。